Modulys RM GP 25-100 kVA

Võimsusele 4 x 25 kW
Modulaarne UPS-lahendus kliendi seadmekappi (19")

MODULYS RM GP is a 3-phase modular UPS system designed for 19” rack integration. 
Easy to integrate and install whilst simple to manage and maintain, it provides maximum availability and power protection in a compact design leaving free space for other rack-mounted devices.

Designed for 19” rack integration

Easy to integrate

• For integration in 19” standard rack cabinets.
• Adjustable rails and mounting accessories.
• Pre-cabled system for simplified connections.

 

No-risk integration

• Assured compatibility with any 19” standard rack cabinet.
• Pre-engineered and lab-tested parts.
• Automatic self-configuration power modules.

 

Easy to customise

• Complete set of pre-engineered and pretested parts to meet any customer need.

Easy to manage

• Full documentation package available.
• Factory-set configurations for easy model selection.
• Full set of pre-engineered options for easy product customisation.

Overall cost optimisation

• 2 compact sub-rack enclosure models for optimum sizing.
• Best-in-class €/ kW ratio
• Plug & Play and self-configuration power modules
• Pre-engineered and lab-tested parts.

Simplified logistics

• Fewer standardised parts for easy ordering.
• Parts always in stock for fast procurement.
• Fewer parts covering a wide range of configurations, power, back-up time and options.

Designed to assure absolute business continuity

Total resilience

• Electronics-free (failure-free) sub-rack enclosure.
• Totally independent and self-sufficient modules.
• No centralised control for parallel and load sharing management.
• Totally segregated, fully sized and centralised auxiliary mains bypass and distributed inverter bypass.
• Configurable N+1 redundancy (power & battery).
• No single point of failure.
• Redundant parallel bus connection (ring configuration).

Optimum reliability

• Power module designed for superior robustness verified by an independent body.
• Highly robust bypass.
• Acid leak-proof modular battery box.

Maximum availability

• Fast recovery of lost redundancy thanks to minimum MTTR.
• No risk of downtime during power upgrading and maintenance.
• No risk of failure propagation.

Pay as you need

• Totally modular rack-mounting system for power scaling or for quickly adapting to business changes.
• No prior expenditure for unpredictable future extensions in power and back up time.
• No need to duplicate the system hardware to get redundancy.

Enhanced serviceability performance

• Fast and safe maintenance based on hot-swap parts (power modules, bypass, electronic boards, batteries).
• Safe and risk-free maintenance: only sealed box is replaced, no exposed live parts.
• Concurrent maintenance: no need to switch on static bypass or maintenance bypass.
• Battery can be hot-swapped without shutting down the connected equipment.

Technical data

  MODULYS RM GP
Model  9U  15U
Number of power modules  1 to 2 x 25 kW  1 to 4 x 25 kW
Configuration  N, N+1 redundant
Power (Sn)  25 to 50 kVA  25 to 75 kVA
Power (Pn)  25 to 50 kW  25 to 75 kW
Input / output  3 / 3
Input
Voltage  400 V 3ph (340 V to 480 V)
Frequency  50 / 60 Hz ±10 %
Power factor / THDI  > 0.99 / < 3 %
Output
Voltage  380 / 400 / 415 V ±1 % 3ph+N
Frequency  50 / 60 Hz ±0.1 %
Voltage distortion  < 1 % (linear load), < 4 % (non-linear load according to lEC 62040-3)
Short-circuit current  up to 3 x In
Overload  125 % for 10 minutes, 150 % for 1 minute
Crest factor  3:1
Hot-swap bypass
Voltage Rated output voltage ±15 % (configurable from 10 % to 20 %)
Frequency  50 / 60 Hz ±2 % (configurable for GenSet compatibility)
Weight  7 kg  7.5 kg
Efficiency (TÜV SÜD verified)
Online double conversion mode  up to 96.5 %
Environment
Ambient temperature 0 °C to 40 °C (15 to 25 °C for maximum battery life)
Relative humidity  0 to 95 % without condensation 
Maximum altitude  1000 m without derating (3000 m max)
Acoustic level at 1 m  < 53 dBA
UPS rack  
Dimensions W x D x H  442 mm x 920 mm x 9 U  442 mm x 920 mm x 15 U
Weight (empty cabinet)  36 kg  42 kg
Degree of protection IP20
Hot-swap power module
Height  3U
Weight  34 kg
Type  Hot plug-in / Hot-swappable
MTBF  > 1000000 hours (calculated and verified)
Hot-swap battery rack
Type  Acid leak-proof - Long Life batteries
Protection  Independent protection for each battery string
Dimensions W x D x H  442 mm x 890 mm x 4 U
Weight (empty rack)  15 kg
Standards
Safety  EN 62040-1, EN 60950-1      
EMC  EN 62040-2 Class C2
Performance  EN 62040-3 (VFI-SS-111)      
Product certification  CE
Socomec-logo

Kuidas osta?

Äri- ja erakliendid:
Enamik meie toodetest on saadaval elektrimaterjalide hulgimüügifirmades. Siit leiad meie koostööpartnerid – elektrimaterjalide hulgimüüjad.

Projektimüük, jõuelektroonika tooted, varustus ja erilahendused:
Palun võtke meiega ühendust.

Rohkem infot toodete kohta:

Margus Tiirusson

Mobiil: (+372) 51 39 138